Country Selection

This will be the country where your order will be shipped to.



Alternative - Archery Shop
Alternative - Archery Shop
×

Easton Triumph shafts (doz) - SALE

Easton Triumph shafts (doz) - SALE

ERROR% OFF

Price: ERRORERROR

SALE: ERRORERROR (doz)

ERROR

Alternative Services Stock status: Available whilst stocks last. 1 doz 350, 1 doz 400, 1 doz 450 (cut to 29.5in) remaining

Description: CLEARANCE SALE - Easton has developed the first series of World Archery compliant, maximum-diameter carbon shafts for indoor competitors. Every shaft is 9.3 mm dia. Features a proprietary internal alloy armor component designed to add FOC balance, and reinforce the point end of the shaft from the crushing forces of materials such as fresh Stramit. Price for dozen shafts and both G-type and S-type uni bushings included.

Select Options

The Cutting Length is measured from the nock groove to the end of the shaft not including the point. Please specify the length in INCHES. It is essential that you state clearly which make/model nocks you are using as these are involved in the measurement calculation.

Correct Arrow Length

Your arrow shafts will remain uncut if insufficient information is provided.

If no cutting is required please leave the box blank.

Nocks are not included with shafts and must be purchased separately.

To order please enter quantity required, choose or enter specifications where applicable, then click the button below

Items listed as SPECIAL means it is not normally stocked and needs buying in specially for you.

Items listed as SOLD means it is sold out and more are on order with our various suppliers.

Return to Shop Floor

Further Information
Easton
Easton Triumph

Triumph

Shoot more 10s with Triumph

In its effort to constantly push the performance envelope for accuracy, Easton has developed the first series of World Archery compliant, maximum-diameter carbon shafts for indoor competitors. The new Easton Triumph is the first series of all carbon shafts with every arrow in the series at the maximum 9.3 mm diameter across the range.

The new Easton Triumph comes in four spine sizes, 350, 400, 450 and 500.

In addition, every Triumph uses the same points- no separate points are needed for each size. There are five point weights from 100 to 200 grains with 25 grain increments. Triumphs accept size-specific pin nock adapters or UNI bushes.

The key to the performance of the Triumph goes beyond the usual tight Easton spine and weight tolerances- each Triumph features a proprietary internal alloy armor component designed to add FOC balance, and reinforce the point end of the shaft from the crushing forces of materials such as fresh Stramit.

The Triumph design calls for all cutting to be done from the back portion of the shaft, to maintain the full effect of the armour system.

The unique aspect of the new Triumph, with every spine size at the full, maximum 9.3 mm World Archery allowed diameter, enhances the potential to catch lines in case of a less than perfect shot. This feature makes Triumph the most advanced indoor shaft yet developed.


Triumph is engineered for superior accuracy and performance in even the toughest target materials, and every size Triumph is designed at the maximum allowable diameter for World Archery competition. With a choice of four sizes, three nock systems, and five point weights, there’s a Triumph for every competitive bow style and required state of tune.

Triumph’s internal armor system provides a natural advantage in terms of front-of-center balance, providing even more stability and accuracy, without compromising dynamic spine.

Note: Triumph shafts are precision-cut and squared at the front for optimal point alignment and fit, and should only be cut from the rear before nock system installation and assembly. Cutting the shaft at the point end will reduce the effectiveness of the internal armor system and potentially decrease durability in hard targets. This will void warranty.

Cutting Instructions: Use only a high-speed, thin-blade pro shop saw for cutting Triumph shafts. NOTE: Cut shafts ONLY from the rear, designated by the printed gold band. DO NOT cut the end with the aluminum armor core.

Point installation: Triumph shafts are compatible with the use of Easton low-temperature hot melt cement for point installation. Easton recommends use of a gel-type cyanoacrylate for UNI bushing installation, and a small drop of hot melt for installation of PIN Nock adapters.

Features:

  • Armored Carbon Technology
  • Straightness: ± .002
  • Weight tolerance: ± 1 grain
  • All sizes at World Archery maximum allowed 9.3mm outside diameter
  • Black, smooth matte finish
  • Multi-layer wrapped carbon fibers
  • S or G UNI Bushing included
  • Pin nock adapter sold separately
  • Points fit all shaft sizes, sold separately, available weights: 100, 125, 150, 175 and 200 grains
  • Nominal GPI: 350/9.25, 400/8.8, 450/8.5, 500/8.2

Factory Lengths:

  • 350 - 31.75in
  • 400 - 31.25in
  • 450 - 30.75in
  • 500 - 30.25in

The only difference between S fitting and G fitting models is the pack of uni bushes included with the shafts. Other than that they are identical.

Easton Triumph

Easton Triumph
Information provided courtesy of Easton

Advice and technical information...
Arrow Advice

DISCLAIMER: Whilst every effort is made to provide the latest and most accurate information on the products featured on this web site, manufacturers may occasionally change their product specifications without warning.

Price Policy: All prices are constantly reviewed and may change subject to currency exchange rate fluctuations. Our policy is to charge the prices listed at the time of your order being placed.

COPYRIGHT: All images and text are the exclusive property of Alternative Services.

Related items...

Easton Triumph shafts (doz) - SALE

Easton Triumph point (doz)

Easton Uni Bush Triumph (pk/12)

Easton Triumph Pin (doz)

Competition PIN Point for Triumph (pk/12)