Country Selection

Please select the country where your order will be shipped to.



Further Information
Easton
Easton ACE Shafts

Easton ACE shafts

The Easton ACE was introduced to the competitive archery world many years ago, and it is still one of the lightest, most consistent target shafts ever created.

Unidirectional carbon fibres bonded to the precision-drawn, high strength aluminium core provide an extremely accurate and durable shaft. Easton's exclusive barrel-shape technology, introduced with the ACE, provides a lighter, stiffer shaft. The lighter ends create a higher natural frequency of vibration for better clearance.

Precision state-of-the-art manufacturing processes ensure each shaft is perfectly matched in weight and spine. ACEs provide field and target archers with superb performance.

We cannot guarantee specific "C" numbers for these shafts but if you ask for them then we will try and obtain them for you.

Easton ACE shafts should be sold only in matched dozens - as supplied by Easton. Beware of any dealer selling part sets or individual shafts.

  • High-strength carbon fiber bonded to a 7075 alloy core
  • Polished black carbon finish
  • Barrelled design
  • Straightness: +/- .0015in
  • Weight tolerance: +/- 0.5 grains
  • Components sold separately

    Easton ACE spine sizes
  • 370
  • 400
  • 430
  • 470
  • 520
  • 570
  • 620
  • 670
  • 720
  • 780
  • 850
  • 920
  • 1000
  • 1100
  • 1250

Listed below are the official Easton Model Specifications for ACE shafts and their accessories...

Shaft ModelACE
Materials/ConstructionCarbon fibre bonded to a 7075 core tube
Nock SystemInsert or Pin
Nock TypeG nock or ACE Pin Nock
Weight Tolerance+/- 0.5 grains within matched dozen
Straightness+/- .002" (.004" TIR)
ColourPolished Black Carbon


Shaft Size Spine @ 28" span (inches) Shaft Weight (gns/inch) Shaft OD (inches) Stock Shaft Length (inches) Rec'd Point Weight (grains) Rec'd Insert + Point Maximum Trim Amount (inches)
12501.2505.0.20526 5/86060/70/80No limit
11001.1005.1.20528 5/87060/70/80No limit
10001.0005.7.21328 5/870H2No limit
9200.9205.8.21328 5/875H39.5
8500.8505.7.21328 5/875H3No limit
7800.7806.0.21629 5/880J2No limit
7200.7206.3.21529 5/880J26.0
6700.6705.9.21230 5/880J2No limit
6200.6206.1.21430 5/885J3No limit
5700.5706.3.21631 5/885J310.0
5200.5206.6.21631 5/890L24.5
4700.4706.9.22332 5/895L36.5
4300.4307.1.22432 5/8100L45.5
4000.4007.6.23032 5/8110100/110/1204.0
3700.3707.9.23032 5/8120100/110/1204.0

Weight - Due to the barrel design of the ACE, the weight is and average grains per inch of a 29in shaft. Shaft weight is slightly heavier in the larger diameter centre and lighter towards the tapered ends. One inch of shaft cut from the point end typically weighs 5-6 grains.

1100 and 1250 sizes are available as special order only from the factory. Replaced with the ACC -00 sizes.

OD - Nominal outside diameter at the mid point of shaft. Ends are smaller due to the barrel design.

Trim Amount - Recommended that no more than these lengths be cut from the front of the shaft.

Information provided courtesy of Easton Archery